HRD408 N-Molybdenum Compound
Category:
Friction Modifier
Product characteristics
Telephone:
Product details
HRD408 N-Molybdenum Compound
- Product Introduction
Molybdenum Compound is an oil-soluble, liquid and N-containing organic Molybdenum lubricant additives. This product is manufactured through up-to-date chemical processing. lt can be engineered into lubricating oils and greases to significantly enhance their anti-wear and friction reducing performance. Additionally, it shows good high temperature anti-oxidation property and low treatment level of this product into lubricants can bring them exceptional performance and high fuel economy.
- Technical Specification
Item |
Index |
Chemical component |
N-containing organic Molybdenum |
Appearance |
Brown liquid |
Density(15.6°C), g/cm3 |
1.01 |
Viscosity(100°C),mm2/s |
7.7 |
Flash point (open cup),°C |
187 |
Mo% |
6.3 |
P% |
4.3 |
S% |
8.5 |
N% |
0.62 |
Compatibility |
Well compatible with mineral and synthetic oils and insoluble in water |
- Recommended treatment level
Engine oils and industrial oils |
0.1%-0.7% |
Lubricating greases |
1-3% |
- Storage and transport conditions
The product is packed in iron drums with a net weight of 200kg, applicable to various modes of transportation.
The maximum storage and transportation temperature shall not exceed 75℃ in short term, and shall not exceed 45℃ in long term. The shelf life is 2 years, stored in dry, clean, ventilated warehouse.
This product is not flammable, explosive and corrosive, with no special protection required. In case of accidental contact with skin, wash it off thoroughly with water and detergents.